Inglenook Fusion Mineral Paint

Serene and calm, Inglenook is a washed blue-grey with a drop of pale green. Depending on the lighting, it can look more blue or more green.

• Base : water based
• Coverage : approx 75 sq ft per 500 ml (7 sq m per 500ml)
• Finish/Sheen: matte
• Clean up : water
• Dry Time: 30 min approx
• Recoat Time: 1-1.5 hours approx
• Cure Time: 21 days approx

DIRECTIONS

Prep: Clean the surface: Mild soapy degreaser and water. We suggest Fusion TSP alternative cleaner to remove dirt, grease and dust. Rinse off your cleaner and dry

Paint: Choose any Fusion colour and paint it beautiful. Stir or shake paint well

Apply: Brush or roll on. We suggest 2 coats minimum

Extra Prep ONLY if needed:

Remove Wax (if needed) Use turps or mineral spirits to remove any wax coating.
Light Scuff Sanding (if needed): Sand high gloss finishes to dull the sheen or smooth out a surface. Remove any flaky bits of existing finish.

Tricky Surfaces: with use of Ultra Grip

Note: Priming is usually not necessary with Fusion Mineral Paint. For bleed-through or knots, use Zinsser BIN Shellac-based primer. For dark-to-white transitions, use a mid-tone colour like Sterling as a primer so you do less coats.

Frequently Asked Questions

HOW TO GUIDE